Memorex MVD-2037 O/M.QXD - Manual (Page 19)

19
Use this option to set the Digital Output. See the chart below for specific outputs.
Select the Audio menu as shown above. Select Digital Output using the
Navigation (π,†) buttons 1, then press the Navigation (®) button 1; the Digital
Output options will appear. Select one of the options (described below) using the
Navigation (π,†) buttons 1, then press the ENTER button 2.
S/PDIF: Select this when your equipment is connected via Optical/Coaxial
cable. Select as follows:
PCM: Decodes using the internal decoder and outputs the audio in PCM form
from the S/PDIF output jack(s).
BITSTREAM: Outputs the original bit stream directly from the S/PDIF output
jacks.
HDMI AUDIO: Select this when your equipment is connected via HDMI cable.
Select as follows:
PCM: Decodes using the internal decoder and outputs the audio in PCM form
from the HDMI output jack.
BITSTREAM: Outputs the original bit stream directly from the HDMI output
jack.
1
2
1
AUDIO SETUP MENU:
To enter the Audio Setup menu, press the SETUP button, select Audio using the Navigation (π,†) buttons and then press
the Navigation (®) button.
DIGITAL OUTPUT
SETUP MENU (CONTINUED)
General
Video
Audio
Language
Parental
Digital Output
PCMDown Sampling
Dynamic Compression
Speaker
Select the digital audio output conrector
General
Video
Language
Parental
Audio