Maxtor DIAMONDMAX 100451230 - Manual (Page 18)

10 DiamondMax 21 Serial ATA Product Manual, Rev. A
Table 4: Drive specifications summary for the 80 Gbyte model
Drive specification ST380215AS
Formatted capacity (512 bytes/sector)* 80 Gbytes
Guaranteed sectors 156,301,488
Heads 1
Discs 1
Bytes per sector 512
Default sectors per track 63
Default read/write heads 16
Default cylinders 16,383
Recording density 824 kbits/in max
Track density 137.259 ktracks/in avg
Areal density 101 Gbits/in 2 avg
Spindle speed 7,200 RPM
Internal data transfer rate 930 Mbits/sec max
Sustained data transfer rate OD 78 Mbytes/sec max
I/O data-transfer rate 300 Mbytes/sec max
ATA data-transfer modes supported PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Cache buffer 2 Mbytes
Height (max) 19.99 mm (0.787 inches)
Width (max) 101.6 mm (4.000 inches) +/- 0.010 inches
Length (max) 146.99 mm (5.787 inches)
Weight (typical) 365 grams (0.805 lb.)
Average latency 4.16 msec
Power-on to read 7.9 sec max
Standby to ready 7.9 sec max
Track-to-track seek time <1.0 msec typical read); <1.2 msec typical write
Average seek, read <11 msec typical
Average seek, write <12 msec typical
Startup current (typical) 12V (peak) 2.8 amps
Voltage tolerance (including noise) 5V ± 5%
12V ± 10%
Ambient temperature 0° to 60°C (operating)
–40° to 75°C (nonoperating)
Temperature gradient 20°C per hour max (operating)
30°C per hour max (nonoperating)
Relative humidity 5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient 30% per hour max
Wet bulb temperature 37.7°C max (operating)
40°C max (nonoperating)
Altitude, operating –60.96 m to 3,048 m
(–200 ft. to 10,000+ ft.)
Altitude, nonoperating
(below mean sea level, max)
–60.96 m to 12,192 m
(–200 ft. to 40,000+ ft.)
Operational Shock 63 Gs max at 2 msec
Non-Operational Shock 350 Gs max at 2 msec