Mercedes-Benz 2004 C 320 Sport - Manual (Page 181)

181
Controls in detail
Audio system
Scan tuning
ț Starting scan tuning
̈ Select desired frequency band.
̈ Press 2 button.
SC will appear on the display. The
radio briefly tunes in all receivable
stations on the band selected. The
first scan cycle will tune in only the
stations with a strong signal. The
second scan cycle will tune in every
receivable station.
ț Ending scan tuning
̈ Press 2 button or d, c,
f or e button.
SC disappears from the display.
Manual station memory (Presets)
You can store ten AM and ten FM stations.
ț Storing stations
̈ Tune in the desired station.
̈ Press and hold desired station
button
4 to M until a brief
signal tone is heard.
The frequency is stored on the
selected station button.
The frequency band and station
button number are shown in the up-
per left-hand corner of the display.
ț Retrieving a station from memory
̈ Press desired station button 4
to M.
Automatic station memory (Autostore)
The Autostore memory function provides
an additional memory level. The station
memory for manually stored stations is not
overwritten.
ț Calling up Autostore memory level
̈ Briefly press the AS key.
AS is highlighted in the display.
The radio finds the ten stations with
the strongest signals. These
stations are stored on the station
buttons
4 to M in order of
signal strength.
ț Retrieving a station from memory
̈ Press desired station button 4
to M.
ț Leaving the Autostore memory level
̈ Press the AS key.
The highlighted AS in the display
disappears.