MicroNet Technology SP906GK - Manual (Page 17)

- 14 -
802.1x Setting When you set the Authentication Type to Open,
Shared, WPA or WPA2, you can also enable IEEE
802.1x setting to use the authentication server or
certification server to authenticate client users.
WPA Pre-Shared Key The WPA-PSK key can be from 8 to 64 characters and
can be letters or numbers. This same key must be
used on all of the wireless stations in the network.
WEP Key
(Key1 ~ Key4) The WEP keys are used to encrypt data transmitted in
the wireless network. There are two types of key
length: 64-bit and 128-bit. Select the default encryption
key from Key 1 to Key 4 by selected the radio button.
Fill the text box by as instructed below:
64-bit – Input 10-digit Hex values (in the “A-F”, “a-f”
and “0-9” range) or 5-digit ASCII characters (including
“a-z” and “0-9”) as the encryption keys. For example:
“0123456aef“or “test1”.
128-bit – Input 26-digit Hex values (in the “A-F”, “a-f”
and “0-9” range) or 13-digit ASCII characters (including
“a-z” and “0-9”) as the encryption keys. For example:
“01234567890123456789abcdef“ or “administrator”.