MicroNet Technology SP906GK - Manual (Page 26)

- 23 -
compressing the data and decreasing the waiting time for sending the next data to the
Routers or APs. This feature (known as Turbo Mode) enables higher throughput than
IEEE 802.11g standard (Up to 54Mbps).
When SP906GK is connecting to the Routers or APs with the proprietary Turbo Mode
feature, the Turbo Mode will be enabled automatically without any configuration.
A. Right Click the “Wireless Network Connection” and select “Properties”.
B. Click “Configure…”.
C. Select “Advanced” page, enable the “Turbo mode”.