Installation – Motorola CG3500 User Manual
Page 13
9
INSTALLATION
If you already have a TV connected to the cable outlet, you will need to use a 5-900 MHz splitter. Connect the coaxial cable as
shown below:
LINE 2
LINE 1
ENET
POWER
CABLE
5-900
MHz
splitter
To cable
outlet
To TV
MODEL: CG3500 Communications Gateway
Made in Taiwan, R. O. C.
S/N: PPPPMMYJJJ SSSSSCKAABBCCCC
CUST S/N: BCDFGHJKLMNP
P/N: 480473-001
HFC MAC ID: ABCDEF012345
2
Connect the 10Base-T Ethernet cable to the CG3500 connector marked ENET and the other end to the Ethernet jack on the
back of your computer.
3
Connect your telephone to the CG3500 connector marked
LINE
1.
A separate phone line can be connected to the CG3500
connector marked
LINE
2. Each line connector on the CG3500 supports up to five telephones (one REN per telephone).
4
Connect the UPS cable to the CG3500 connector marked
POWER
as shown in the following sections.