Motorola BLE100 - Manual (Page 13)

2-2 Overview
BLE100 Installation and Operation Manual
Ordering Matrix
Several models of the BLE100 are available. The BLE100 is fully configured in the Motorola
factory per customer request. You can find the model name on labels on the outside of the
shipping carton, the side of the BLE100 housing, and the side of the electronics module.
Please see the Product Data Sheet on the Motorola on line Product Catalog for available models
and associated part numbers.
Figure 2-2 identifies and describes the model strings.
Figure 2-2
BLE100 ordering matrix
BLE
Key
X
Station Slope
9 dB (Fmin-1003 MHz)
Key
X
Return Gain
High (24 dB)
Key
100S
100K
100A
100J
100N
Bandpass Split
5-40 MHz/52-1003 MHz
5-42 MHz/54-1003 MHz
5-65 MHz/85-1003 MHz
5-55 MHz/70-1003 MHz
5-85 MHz/105-1003 MHz
Key
H
Gain
E-GaAs (High Output w/34 dB Gain)
* Electronics modules available are configured for manual level control only.
The ADU must be ordered and installed separately.
Notes:
1. FTECs and 20A fuses are included in all amplifiers as standard.
2. ICS and status monitor transponders will continue to be customer configurable options.
Housing*
E15
F
E10
Electronics only (15 amp)
Electronics only (10 amp)
Standard (Full Station)
Key Key
X
A
Q
Level Control
None
ADU-499.25/S
QADU-609.00/S