Multiquip Rammax Tandem Vibratory Roller T23 - Manual (Page 11)

TANDEM ROLLER: T23, T26, T33 — PARTS & OPERATION MANUAL — REV. #4 (03/12/01) — PAGE 11
SAFETY INSTRUCTIONS
No modifications may be made on the ROPS without
authorization from the manufacturer!
Never operate the machine with the ROPS in the tilted position.
Safety stickers on the machine
■ Keep safety stickers and safety plates clean and readable.
■ All instructions have to be followed.
■ Damaged or incomplete stickers must be replaced
immediately.
Noise level:
The following noise levels have been measured according to
the CE regulations 98/68/EWG,
■ Engine at nominal RPM
■ Microphone fixed at 1, 2m height
Measurement conditions:
■ Hard ground, no snow, dry within 20 m., no noise reflecting
objects.
■ Wind noise must be below 10dB(A) of the measured
machine noise values.
■ Noise level indications according to annex 1, Chapter
1.7.4 f of the CE machines specifications
Noise at driver’s ear: 77.5 dB(A)
Constant noise level at 7m distance: 66.1 dB(A)
While working on the machine or on moving parts of the
machine, never wear a scarf, tie, bracelet or loose clothing.
Should the machine catch those items, severe injuries could be
caused.
➜