Multiquip Rammax Tandem Vibratory Roller T23 - Manual (Page 29)

TANDEM ROLLER: T23, T26, T33 — PARTS & OPERATION MANUAL — REV. #4 (03/12/01) — PAGE 29
MAINTENANCE & REPAIR
Front drive motor (1)
Rear drive motor (1)
Release of spring brake
Remove plug (1).
Install bolt M12X35 with washer (2) in its place.
(In pocket behind seat)
Attention!
Compared to the A4VG28 drive pump installed up to Serial
Number 0899, this pump does no more have the possibility to
slacken the relief valve cartridges (1) to open the by-pass.
Should the machine really need to be towed away, the main
ports A and B on the drive pump would have to be connected to
each other.
After towing the machine with released brakes, braking
mode must be re-established.
Change / add hydraulic oil
➊
➊
➊
➋
➊
➊