MITSUBISHI ELECTRIC WS-65315 - Manual (Page 65)

64 65
Component Inputs
These inputs are compatible with most standard
DVD and DTV signals with component video
outputs. Compatible DTV signals are SDTV 480i,
480p, and HDTV 1080i.
All other DTV signals, such as 720p, need to be
converted by the DTV receiver (or compatible
device) to one of the compatible signal types.
Please check the specifications on your device
before connecting.
Input Levels with Component Video
Y = 1.0Vp-p (includes sync) 75ohms
Pb = 700mVp-p, 75ohms (can also receive
signals from outputs labeled B-Y and Cb)
Pr = 700mVp-p, 75ohms (can also receive
signals from outputs labeled R-Y and Cr)
Input Levels When Used With
Component Video Signals
EIA - 770.3 Standard Levels
Y = 1.0Vp-p (includes sync) 75ohms
Pb = 700mVp-p, 75ohms
Pr = 700mVp-p, 75ohms
H = Not Used
V = Not Used
Input Levels when Used With
RGB Video Signals
G (Y) = 1.0Vp-p 75ohms
(compatible with sync on green)
B (Pb) = 700mVp-p, 75ohms
R (Pr) = 700mVp-p, 75ohms
H = 4Vp-p+/-1.0v, 2.2k ohms
(when using separate H and V sync)
V = 4Vp-p+/-1.0v, 2.2k ohms
Input when Used With DVI
HDCP compliant
E-EDID (Enhanced-Extended Display
Identification) 1.3 compliant
DVI-D uncompressed, high-speed, digital
single-link connection
Compatible scan rates are 1080i, 480p, 480i
DTV Input
These inputs are compatible with most standard
DVD and DTV signals with component video
outputs. Compatible DTV signals are SDTV 480i,
480p, and HDTV 1080i.
All other DTV signals, such as 720p, need to be
converted by the DTV receiver (or compatible
device) to one of the compatible signal types.
Please check the specifications on your device
before connecting.
This input is also compatible with some DTV
receivers using RGB or RGB with “separate H
and V sync.” Industry standards for DTV RGB
signals systems, synchronization, timing, and
signal strengths are not currently established.
These inputs will not be compatible with all DTV
receivers that offer RGB. If your DTV receiver
offers both DTV component video signals and DTV
RGB signals, Mitsubishi suggests you use the DTV
component video signals. Please check the DTV
receiver specifications before connecting.
Appendix B: High Definition Input Connection
Compatibility
A
p
p
en
d
ix
B
: H
ig
h D
ef
in
iti
o
n I
np
ut
C
o
nn
ec
ti
o
n C
o
m
p
ati
b
ilit
y