Miele CVA 615 - Manual (Page 49)

What if... Possible fault Fix
. . . the espresso is
dispensed too
quickly? The grinder is set to
too coarse of a
setting. Select a finer setting.
. . . the espresso is
dispensed too
slowly? The grinder is set to
too fine of a setting. Select a coarser setting.
. . . the coffee is not
hot enough? Was the system
warmed? Pre-warm the system and cups.
Check the temperature setting of
the coffee selected.
Check if the brew unit is clogged.
Clean the brew unit.
. . . coffee was not
dispensed although
the beans were
ground and the water
tank is full? Was the grinder set
to the finest and to
the maximum
quantity of coffee? The grinding process might have
taken too long not allowing time for
brewing.
Set the grind size or the grinding
amount to a different position.
. . . the descaling
process was started
accidently? Press ENTER once.
The program will stop.
If descaling agent is in the water
tank, empty the water tank and
rinse thoroughly with fresh water to
clean away any descaling agent.
The descaling process cannot be
canceled once the steam selector
is turned. The process must be
completed. This is a safety feature
so that the unit descales
completely.
. . . the warm up time
is longer, less water
is dispensed and the
machine is not
working properly? The unit needs
descaling. Descale the machine.
See "Descaling the appliance."
Frequently asked questions
49