Memorex MPH2430 - Manual (Page 26)

25
TELEPHONE OPERATION (CONTINUED)
PAGING THE HANDSET
Press the PAGE button on the base to
locate the handset when not in use;
the handset will beep for one minute
and “PAGING” will appear in the
display during paging. Press the
PAGE button again on the base to
stop.
1
INSERTING A PAUSE
In some cases, such as a PBX or long
distance service, a pause may be
needed in the dialing sequence.
Pressing the SAVE/RE/PA button on
the handset will insert a two second
delay between dialed numbers.
Pauses can also be entered in
programming dialing sequence in
memory dialing.
1
USING THE TEMPORARY TONE
If you are in a Pulse dialing area you
may still take advantage of touch-tone
services after dialing to respond to
touch-tone prompts. To do this, press
the Temporary Tone/
Button to
temporarily change the dialing mode
from Pulse to Tone after dialing in the
Pulse mode. This will enable Pulse
users to access touch-tone services. It
will revert back to Pulse after hanging
up.
1
CALL WAITING
If you subscribe to Call Waiting through
your local phone company, and you
receive another phone call, the phone
will alert you with a beep and the display
will show the name and number. Simply
press the EDIT/FLASH button to answer
the new call. Press the EDIT/FLASH
button again to return to the original call.
Call Waiting Caller ID also needs to be
subscribed to in order to see the new
caller’s name/number on the display if
you are already on the phone.
1
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 25