Memorex MPH2430 - Manual (Page 39)

38
SETTING THE RING SELECT SWITCH
To choose a number of times the phone rings before the answering system
answers, set the RING SELECT switch as follows:
Slide the RING SELECT switch to one of the following positions:
3R: The system will answer the call after the third ring.
5R: The system will answer the call after the fifth ring.
TS: Use toll-saver when you will be checking your system for messages from a
remote location using long distance services or from a pay phone. The
answering system will pick up after the third ring only if a new ICM has been
received. If there are no new messages, the answering system will answer
after the fifth ring. You can then hang up after the fourth ring to avoid paying
for the call.
1
ANSWERING MACHINE OPERATION (CONTINUED)
RECORDING A MEMO IN THE PRIMARY MAILBOX
Press and hold the MEMO button and
begin speaking after the unit
announces “Please record your
message after the beep”.
1
Release the MEMO button when the
memo is completed and the unit will
announce, “End of recording”. The day
and time are automatically stamped at
the end of the memo.
The answering system will advance
the message count after the actual
memo is recorded.
2
MSSG ALERT SWITCH
Slide this switch to the ON position and the unit will beep every 12 seconds when a
new message has been received. Slide to the OFF position to turn this feature off.
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 38