Motorola XPR 5550 - Manual (Page 72)

Advanced Features
English
60
conventional
Multi-Site Controls
These features are applicable when your current radio channel
is part of an IP Site Connect or Linked Capacity Plus
configuration.
See IP Site Connect on page 8 and Linked Capacity Plus on
page 9 for more details about these configurations.
Starting an Automatic Site Search
NOTE: The radio only scans for a new site if the current signal
is weak or when the radio is unable to detect any signal
from the current site. If the RSSI value is strong, the
radio remains on the current site.
Procedure:
Press the programmed Site Lock On/Off button.
1 A tone sounds and the display shows Site Unlocked.
2 The yellow LED blinks rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
3 The display shows the channel alias and the site roaming
icon appears.
OR
Procedure:
Use the menu.
1 g to access the menu.
2 f or h to Utilities and press g to select.
3 f or h to Radio Settings and press g to select.
4 f or h to Site Roaming and press g to select.
5 f or h to Unlock Site and press g to select. A tone
sounds and the display shows Site Unlocked.
6 The radio returns to the Home screen. The display shows
the channel alias and the site roaming icon appears.
7 The yellow LED blinks rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
The radio also performs an automatic site search (site is
unlocked) during a PTT button press or data transmission if the
current channel, a multi-site channel with an attached roam list,
is out of range.
Stopping an Automatic Site Search
When the radio is actively searching for a new site: