Motorola XPR 5550 - Manual (Page 87)

Advanced Features
English
75
3 f or h to Radio Settings and press g to select.
4 f or h to Analog Mic AGC.
5 Press g to enable Analog Mic AGC. The display shows 9
beside Enabled.
OR
Press
g to disable Analog Mic AGC. The 9 disappears
from beside Enabled.
Digital Mic AGC
This feature controls the your radio's microphone gain
automatically while transmitting on an digital system. It
suppresses loud audio or boosts soft audio to a preset value in
order to provide a consistent level of audio.
Procedure:
1 g to access the menu.
2 f or h to Utilities and press g to select.
3 f or h to Radio Settings and press g to select.
4 f or h to Digital Mic AGC.
5 Press g to enable Digital Mic AGC. The display shows 9
beside Enabled.
OR
Press
g to disable Digital Mic AGC. The 9 disappears
from beside Enabled.
Intelligent Audio
Your radio automatically adjusts its audio volume to overcome
current background noise in the environment, inclusive of both
stationary and non-stationary noise sources. This feature is a
Receive-only feature and does not affect Transmit audio.
NOTE: This feature is not applicable during a Bluetooth
session.
Use the following features to toggle Intelligent Audio on or off.
Procedure:
Press the programmed Intelligent Audio button to toggle the
feature on or off.
OR
Follow the procedure below.
1 g to access the menu.
2 f or h to Utilities and press g to select.
3 f or h to Radio Settings and press g to select.
4 f or h to Intelligent Audio.
5 Press g to enable Intelligent Audio. The display shows 9
beside Enabled.
OR
Press
g to disable Intelligent Audio. The 9 disappears
from beside Enabled.