Wireless, Auto scan (wireless), En-44 – Philips Magnavox Blu-Ray Disc/DVD Player with built in WiFi MBP5220F User Manual
Page 44: Continued on next page
EN-44
D Note
for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will automatically be 255.
• When you enter a wrong number, select “Clear” to clear. (The number will be back to “0”.)
• If you want to enter a 1 or 2-digit number in one cell, press [
Æ] to move on to the next digit’s in the cell.
D Note
for “Proxy Address” and “Proxy Port”
• The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than
65535, it will be regarded as 65535.)
• For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.
• Choose a connection speed in accordance with your network environment.
• When the settings are changed, the network connection may be disabled depending on the device.
■ Wireless
If you connect this unit to a wireless network, select “Wireless” and set up necessary settings.
Please make a note of your wireless network name and its WEP / WPA / WPA2 key before proceeding with the setup.
Auto Scan (Wireless)
1. Use [
О / п / Н / Ж] to select “Network Setup” in the home menu, then press [OK].
2. Use [
О / п] to select “Wireless”, then press [OK].
3. Use [
О / п] to select “Auto Scan”, then press [OK].
• This unit will start searching for wireless networks automatically.
4. The result of wireless network searching will be displayed. Use [
О / п] to select the appropriate wireless network
name (SSID), then press [OK].
• If you select an SSID with “
”, please go to step 6.
Access Point Setting (Auto Scan)
Please select the access point.
3 / 7
Cancel
Retry
Access 1
Access 2
Access 3
5. “WEP/WPA Key” entry screen will appear. Enter the WEP / WPA password of the selected wireless network
using cursor buttons, number buttons and color keys, then press [RED] to confirm the password.
• If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the
router.
1
2
3
4
5
6
7
8
9
0
SP
a/A/@
CLR
Done
a
b
c
d
e
f
g
h
i
j
h
l
m n
o
p
q
r
s
t
u
v
w x
y
z
.
-
Done
Cancel
Clear
a/A/@
3 / 7
Access Point Setting (Auto Scan)
Please input the WEP/WPA Key with software keyboard.
XXXXXXX
Continued on next page.