Philips Magnavox CD130MW8 - Manual (Page 30)

30
EN
O
PERATING DVD
Black Level Setting Black Level Setting
DVD
Adjust the black level to make the dark areas of the TV picture brighter.
1
During playback, press [MODE] repeatedly until
“
“ appears.
2
Use [Cursor K / L] to adjust the black level.
or OFF (BLACK LEVEL)
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3
Press [RETURN] to exit.
Note:
• The setting will be kept even if the unit is turned off.
Stereo Sound Mode Stereo Sound Mode
CD
This unit allows you to select a sound mode during audio CD playback.
1
During playback, press [MODE] repeatedly until
“
” appears.
2
Use [Cursor K / L] repeatedly until the desired sound
mode appears.
or STEREO (AUDIO)
• Each time you press [MODE], the sound mode
changes as example below.
STEREO (mixed sound of left and right channels)
L-ch (left channel sound only)
R-ch (right channel sound only)
Note:
• Virtual surround cannot be changed when the sound mode is
set to either “L-ch” or “R-ch”.
Virtual Surround Virtual Surround
You can enjoy virtual surround on your existing 2 channel stereo system.
1
During playback, press [MODE] repeatedly until
“
“ appears.
2
Use [Cursor K / L] to select the sound level.
or 1 (SURROUND)
1 : Natural effect
2 : Emphasized effect
OFF
: No effects (original sound)
3
Press [RETURN] to exit.
Note:
• The setting will be kept even if the unit is turned off.
• For audio CD, virtual surround will not be effective if the
sound mode is set to something other than “STEREO”.
See “Stereo Sound Mode”.
• Turn down the level or select “OFF” if the sound is distorted.
P7401UM_CD130MW8.indd 30 2007/04/23 9:38:41