Philips Magnavox CD130MW8 - Manual (Page 31)

31
EN
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
INTRODUCTION
CONNECTION
INITIAL SETTING
DVD SETTING
INFORMATION
TROUBLESHOOTING
ESPAÑOL
Marker Setup Marker Setup
This feature allows you to assign a specifi c point on a disc to be called back
later.
To set a marker
1
During playback, press [MODE] repeatedly until
“
” or “ ” appears.
e.g.) DVD
/12 (SEARCH)
2
Use [Cursor K /L] repeatedly until maker search menu
appears.
e.g.) DVD
or
3
Use [Cursor s / B] to select an available marker
within 60 seconds.
e.g.) DVD
or
4
When the playback reaches the point at which you
want to set a marker, press [ENTER].
• Marker is now set.
e.g.) DVD
5
Press [RETURN] to exit.
To return to the marker later
1
To select a desired marker, repeat steps 1 to 3 in
“To set a marker“.
e.g.) DVD
2
Press [ENTER] at the desired marker to start playback
from the specific point which you set.
e.g.) DVD
Note:
• Marker search menu will disappear in about 60 seconds
when there is no input.
• You can mark up to 10 points.
• To clear a marker, select the marker to be cleared, and then
press [CLEAR].
• Ejecting the disc or turning off the power will erase all mark-
ers.
• Selecting “ ” at step 3 in the section “To set a marker”
will also erase all markers.
P7401UM_CD130MW8.indd 31 2007/04/23 9:38:42