Mitsumi electronic Pedion Laptop User Manual
Page 80
OWNER’S HANDBOOK
T r o u b l e s h o o t i n g 7 / 9
Infrared communication
Problem
Possible solutions
The infrared feature does not
work
Make sure the surface of the infrared port is clean.
Make sure there is a clear line-of-sight between the Pedion and the
infrared device and that there is nothing obstructing the infrared beam.
Check the settings in the Infrared Monitor in the Windows Control
Panel.
Use BIOS Setup to make sure that the infrared port is enabled.
Erroneous data is transmitted
or received
Make sure that the Pedion and the infrared device are no more than one
metre apart.
Make sure that bright artificial light or sunlight is not interfering with
the infrared beam.
Make sure that other domestic TV or VCR remote controls are not
operating near the Pedion.
Use BIOS Setup to make sure that the infrared port is using the correct
communication standard.