Mintek High Definition Personal Video Recorder - Manual (Page 12)

REMOTE CONTROLS
12
HOW TO IDENTIFY PROGRAMMED CODES
1. Press and hold the SELECT key and the appropriate mode key (AUX, VCR, TV or CBL) until the mode key blinks
twice.
2. Enter carefully the code 9 9 0. After each digit the mode key will blink once. At the end of the operation it
should blink twice.
3. Press 1, then count the number of times the mode key blinks. That number indicates the first digit in the code.
If the mode key does not blink, the digit is 0.
4. Press 2, then count the number of blinks. That number indicates the second digit in the code.
5. Do the same for 3 and 4, and the numbers of blinks. They indicate the third and fourth digits in the code.
HOW TO PROGRAM THE VOLUME CONTROL
This step is not essential, but it gives you better control of the volume on your devices.
1. Press the SETTINGS key twice to display the General Settings screen, and make sure that the Audio: Volume
Control setting is set to Variable.
2. Turn on the device, then press and hold the SELECT and CBL keys until the CBL mode key blinks twice.
3. Enter carefully the code 9 9 3. After each digit the CBL mode key will blink once. At the end of the operation it
should blink twice.
4. On the PVR remote, press the mode key for the appropriate device volume you want to control.
5. Point the remote towards the device, and adjust the volume to confirm that the Volume and Mute keys function
as expected.
REMOTE CONTROLS