Middleby Marshall PS314SBI - Manual (Page 13)

13
ENGLISH
SECTION 3 - OPERATION
I. LOCATION AND DESCRIPTION OF CONTROLS
Fig. 3-1 - Control Panel
"BLOWER" Switch: Turns the blowers and
cooling fans on and off. The HEAT Switch has no
effect unless the BLOWER Switch is in the “ON”
position.
A.
"HEAT" Switch: Allows the gas burner to light.
Activation of the gas burner is determined by the
settings on the Digital Temperature Controller.
"CONVEYOR" Switch: Turns the conveyor drive
motor on and off.
B.
C.
D.
E.
Conveyor Speed Controller: Adjusts and dis-
plays the bake time.
Digital Temperature Controller: Continuously
monitors the oven temperature. Settings on the
Digital Temperture Controller control the activa-
tion of the gas burner.
A.
"BLOWER"
(or " ")
switch
E.
Digital Temperature
(or " ")
controller
D.
Conveyor Speed
(or " ")
controller
NOT SHOWN:
F. Machinery Compartment Access Panel Safety Switch:
Disconnects electrical power to the controls and the blow-
ers when the machinery compartment access panel is
opened. The panel should only be opened by authorized
service personnel.
B.
"HEAT"
(or " ")
switch
C.
"CONVEYOR"
(or " ")
switch