9 gps position quality (no. 11), 10 battery status (no. 12) – Mio P350 User Manual

Page 33

Advertising
background image

Tap the icon again to return to Track-up (automatic rotation) mode.

4.3.9 GPS position quality (No. 11)

Similarly to the icon found on the GPS Data screen (4.4.3), the map screens also
inform you about the GPS signal. They can show the same four values:

The black satellite dish with the red exclamation mark shows there is no

connection with the GPS receiver. GPS navigation is not possible. You Mio
DigiWalker has a built-in GPS receiver that is permanently connected. This
icon may not appear under normal circumstances.

Red shows there is a connection, but the signal is too weak to give a

position. GPS navigation is not possible.

Black shows there is a GPS position, and navigation is possible. When

only one arc is shown, the position is 2D (no altitude available), and position
error may be significant, yet Mio Map is ready to navigate.

A black dish and two arcs represent a 3D GPS position. Mio Map is

ready to navigate.

4.3.10

Battery status (No. 12)

The status of the battery is also shown by Mio Map. You can estimate the available
power reserve from the length of the bar inside. Some examples:

The thunderbolt in the battery shows the battery is being charged.

Battery is not charging, but it is at full capacity.

Battery in not full, but there is sufficient reserve capacity.

When the inside of the battery turns red, the battery needs recharging.

32

Advertising
This manual is related to the following products: