Mio P350 - Manual (Page 84)

exceeds a certain minimum, and reach its highest volume (determined by the Master
volume slider in Sound settings) at the given maximum speed.
Tap the Dynamic Volume button to turn on the feature. This will also open the screen
where you can set the minimum and maximum speeds.
6.2.5 Attention Tone
If this is set to Disabled, the voice guidance will sound without a preceding attention
tone. Setting it to Single Tone (Ding) will initiate a single attention tone before the
instructions, while Double Tone (Ding Ding) will use a double tone.
Note: The Mute function (4.3.11) accessible from the map screens overrides the
settings on this screen. When Mio Map is muted, all sounds disappear. These
settings will not be changed; only the output will be muted temporarily.
6.3 Route parameter settings
This is a very important page. Settings here determine how routes will be calculated.
This screen is directly accessible from the Route Information screen (4.4).
6.3.1 Route
Here you can choose from three different route types.
83