Motorola E365 User Manual
Page 4
4
Mobile WAP Configuration
OTAC Support.
The Motorola E365 does not support OTAC. However, this Motorola uses an Openwave browser. Generally, setting
up an Openwave Browser tends to follow the same procedure.
Set-up of the WAP Configuration Profile.
The following instructions refer to the configuration set-up for WAP over GPRS for the Motorola E365 handset.
1. From the idle screen, press the Menu button.
2. Press
the
down arrow to highlight the Settings menu and press Select.
3. Scroll down to WAP Profile and press Select.
4. Scroll down to Set Profile and press Select.
5. Highlight
the
next available profile and press Select.
6. Scroll
to
Rename and enter GPRS WAP and press OK.
7. Scroll down to Edit and press Select.
8. Scroll
to
Bearer Type and press Select.
9. Scroll
to
GPRS and press Select.
10. Leave User Name and Password blank.
11. Scroll to Apn and press Select and enter telstra.wap.mnc001.mcc505.gprs and press OK.
12. Press Back and Back again.
13. Scroll to CSD and press Select.
14. Check that all fields are empty under the CSD menu.
15. Press Back, Back.
16. Scroll to WAP Setting and press Select.
17. Select Primary IP and press Select and enter 10.1.1.150 and press OK.
18. Select Primary Port and press Select and enter 9203 and press OK.
19. Select Timer and press Select and enter 9999 and press OK.
20. Select Homepage and press Select and enter http://wap.mdata.net.au/home and press OK.
21. Press the hang up key to return to the idle screen.
Choosing a Profile.
To select the above defined profile, follow these instructions:
1. From the idle screen press the Menu button.
2. Press
the
down arrow to highlight the Settings menu and press Select.
3. Scroll down to WAP Profile and press Select.
4. Scroll down to Set Profile and press Select.
5. Scroll down to the GPRS WAP profile and press “Select”.
6. Scroll down to Set default and press Select.