Motorola E365 - Manual (Page 5)

5
7. Press the hang up key to return to the idle screen.
Launching WAP.
There are two ways to launch WAP on the Motorola E365.
> Quick access to WAP
WAP can be accessed by pressing the WAPKEY soft key from the idle screen and selecting the GPRS WAP web
shortcut.
> Accessing WAP via menu
1. From the idle screen press Menu, scroll to Shortcuts and press Select.
2. Scroll down to Browser and press Select.
Multimedia Messaging Service (MMS) Configuration
Using MMS.
MMS requires access to an MMSC and a WAP gateway for notification and access. As such, most handsets
supporting MMS will need both the MMSC address which is a URL and the WAP gateway, which is normally an IP
address to function correctly.
Setting up the Motorola E365 for MMS.
1. From the idle screen, press Menu button.
2. Scroll and highlight the Messages menu item and press Select.
3. Scroll down to Message Settings and press Select.
4. Scroll down to Inbox Setup and press Select.
5. Scroll down to Multimedia Msg Setup and press Change.
6. Scroll down to Service Profile and press Change.
7. Highlight the first profile and press Select.
8. Scroll down to Rename and press Select and enter MMS and press OK.
9. Highlight Edit and press Select.
10. Highlight Bearer Type and press Select.
11. Highlight GPRS and press Select.
12. Leave User Name and Password blank.
13. Scroll to Apn and press Select and enter telstra.mms.mnc001.mcc505.gprs and press OK.
14. Press Back.
15. Scroll to CSD and press Select.
16. Check that all fields are empty under the CSD menu.
17. Press Back and Back again.
18. Scroll to WAP Setting and press Select.
19. Select Primary IP and press Select and enter 10.1.1.155 and press OK.
20. Select Primary Port and press Select and enter 9201 and press OK.
21. Select Timer and press Select, ensure it is blank and press Cancel.
22. Select Homepage and press Select and enter http://mmsc.telstra.com:8002 and press OK.