Program pl/dpl codes – Motorola PM400 User Manual
Page 29
27
English
GETT
ING S
T
ARTED
You can select channels/talkgroups to enable
or disable VOX as preprogrammed by your
dealer/programmer.
PROGRAM PL/DPL CODES
Use this feature to edit the Private-Line/Digital
Private-Line codes for a selected channel/
talkgroup.
1
G
or
H
to select a channel/talkgroup that
has been preprogrammed to enable VOX.
Note: Pressing the PTT button disables
VOX.
2
G
or
H
to select a channel/talkgroup that
has not been preprogrammed to disable
VOX.
1
D
to enter menu mode.
2
G
or
H
until
3
D
to select
EDIT PL
EDIT PL
4
G
or
H
until
– or – until
5
D
to select the current setting.
6
G
or
H
to scroll through the standard
TPL frequencies or DPL codes.
– or –
Enter a non-standard or standard 4-digit
TPL frequency or the 3-digit octal code
(numbers 0-7 only) for DPL via the DTMF
microphone keypad.
7
D
to confirm selection.
8
C
until you exit menu mode.
RX XXX
.
X
TX XXX
.
X
02_GetStarted.fm Page 27 Monday, August 2, 2004 3:43 PM