Magma 7 Slot Series - Manual (Page 8)

M A G M A
iv Preface
proper ESD procedure, which can include wrist straps and smocks,
when servicing equipment.
You can also take the following steps to prevent damage from
electrostatic discharge (ESD):
♦
When unpacking a static-sensitive component from its shipping
carton, do not remove the component’s anti-static packaging
material until you are ready to install the component in a
computer. Just before unwrapping the anti-static packaging,
be sure you are at an ESD workstation or grounded.
♦
When transporting a sensitive component, first place it in an
anti-static container or packaging.
♦
Handle all sensitive components at an ESD workstation. If
possible, use anti-static floor pads and workbench pads.
♦
Handle components and boards with care. Don’t touch the
components or contacts on a board. Hold a board by its edges
or by it’s metal mounting bracket.