Monessen Hearth BWB400 - Manual (Page 27)

27
FINISH WALL
FRAMING
1/4"
INSTALLATION OF NON-COMBUSTIBLE FACING MATERIALS TO THE FRONT FACE OF THE FIREPLACE
COMBUSTIBLE FRAMING COMBUSTIBLE FRAMING
MEMBERS FACING MATERIAL MEMBERS FACING MATERIAL
TO TOP OF SPACERS. TO TOP OF SPACERS.
CAUTION: CAUTION:
DO NOT COVER
DO NOT COVER
OR RESTRICT SIDE VENT
OR RESTRICT SIDE VENT
AREAS WITH SURROUND
AREAS WITH SURROUND
OR TRIM MATERIALS.
OR TRIM MATERIALS.
USE ONLY NON-COMBUSTIBLE USE ONLY NON-COMBUSTIBLE
MATERIALS BELOW TOP OF SPACERS.
MATERIALS BELOW TOP OF SPACERS.
NON-COMBUSTIBLE NON-COMBUSTIBLE
FACING MATERIAL FACING MATERIAL
FIREPLACE FACE FIREPLACE FACE
STEEL LINTEL STEEL LINTEL
(OPTIONAL)
(OPTIONAL)
WARNING: WARNING:
THE SPACE BETWEEN THE
THE SPACE BETWEEN THE
FACE OF THE FIREPLACE
FACE OF THE FIREPLACE
AND THE NON-COMBUSTIBLE
AND THE NON-COMBUSTIBLE
FACING MATERIAL MUST BE
FACING MATERIAL MUST BE
SEALED. FAILURE TO
SEALED. FAILURE TO
PROPERLY SEAL THIS CRACK
PROPERLY SEAL THIS CRACK
CAN CAUSE A POSSIBLE FIRE
CAN CAUSE A POSSIBLE FIRE
HAZARD AND WILL VOID THE
HAZARD AND WILL VOID THE
WARRANTY.
WARRANTY.
SCREENED OPENING
OF FIREPLACE
4"
(REF.)
EXTEND LINE FROM OPPOSITE REAR OF
FIREBOX THRU A POINT 4" IN FRONT OF
FIREPLACE FACE, AND 1" OUTSIDE OF
SCREENED OPENING.
OUTLINE OF
FIREPLACE
FIREBRICK
COMBUSTIBLE SURROUND
MATERIALS MAY BE PLACED
WITHIN SHADED AREAS.
NOTE: COMBUSTIBLE
MATERIALS MUST NOT
OVERLAP BLACK PAINTED
SURFACE MORE THAN 1/8".)
COMBUSTIBLE
FRAMING
MEMBERS
MAY BE
PLACED
ACROSS
TOP SPACERS.
12" MAX.
2 3/4" HOOD
(PART NO.
075629)
SIDE VIEW CUT-AWAY
FACING AND MANTEL CONSTRUCTION
075629 HOOD MUST
BE INSTALLED WHEN
MANTEL IS 12" FROM
FIREPLACE OPENING.
WHEN 075629 HOOD IS
INSTALLED GLASS DOORS
HAVE TO BE REMOVED.
12"
NOTE: NO COMBUSTIBLE
MATERIAL BELOW 12"
FROM OPENING
39 1/2"
44"
(MIN.)
48"
(MIN.)
1 1/2"
MAX.
COMBUSTIBLE
MANTEL AND/OR
TRIM MAY BE
PLACED WITHIN
THE SHADED AREA.
8"
TOP "V"
SPACERS
FLOOR
NON-COMBUSTIBLE
WALLBOARD
USE ONLY NON-COMBUSTIBLE MATERIALS BELOW
TOP OF SPACERS AND BEHIND FRONT FACE.
FINISH WALL
FRAMING
1/4" 1/4"
INSTALLATION OF NON-COMBUSTIBLE FACING MATERIALS TO THE FRONT FACE OF THE FIREPLACE
COMBUSTIBLE FRAMING
MEMBERS FACING MATERIAL
TO TOP OF SPACERS.
CAUTION:
DO NOT COVER
OR RESTRICT SIDE VENT
AREAS WITH SURROUND
OR TRIM MATERIALS.
USE ONLY NON-COMBUSTIBLE
MATERIALS BELOW TOP OF SPACERS.
NON-COMBUSTIBLE
FACING MATERIAL
FIREPLACE FACE
STEEL LINTEL
(OPTIONAL)
WARNING:
THE SPACE BETWEEN THE
FACE OF THE FIREPLACE
AND THE NON-COMBUSTIBLE
FACING MATERIAL MUST BE
SEALED. FAILURE TO
PROPERLY SEAL THIS CRACK
CAN CAUSE A POSSIBLE FIRE
HAZARD AND WILL VOID THE
WARRANTY.
SCREENED OPENING
OF FIREPLACE
4"
(REF.)
EXTEND LINE FROM OPPOSITE REAR OF EXTEND LINE FROM OPPOSITE REAR OF
FIREBOX THRU A POINT 4" IN FRONT OF
FIREPLACE FACE, AND 1" OUTSIDE OF
SCREENED OPENING.
OUTLINE OF OUTLINE OF
FIREPLACE
FIREPLACE
FIREBRICK
FIREBRICK
COMBUSTIBLE SURROUND
MATERIALS MAY BE PLACED
WITHIN SHADED AREAS.
NOTE: COMBUSTIBLE
MATERIALS MUST NOT
OVERLAP BLACK PAINTED
SURFACE MORE THAN 1/8".)
COMBUSTIBLE
FRAMING
MEMBERS
MAY BE
PLACED
ACROSS
TOP SPACERS.
12" MAX.
2 3/4" HOOD
(PART NO.
075629)
SIDE VIEW CUT-AWAY
FACING AND MANTEL CONSTRUCTION
075629 HOOD MUST
BE INSTALLED WHEN
MANTEL IS 12" FROM
FIREPLACE OPENING.
WHEN 075629 HOOD IS
INSTALLED GLASS DOORS
HAVE TO BE REMOVED.
12"
NOTE: NO COMBUSTIBLE
MATERIAL BELOW 12"
FROM OPENING
39 1/2"
44"
(MIN.)
48"
(MIN.)
1 1/2"
MAX.
COMBUSTIBLE
MANTEL AND/OR
TRIM MAY BE
PLACED WITHIN
THE SHADED AREA.
8"
TOP "V"
SPACERS
FLOOR
NON-COMBUSTIBLE
WALLBOARD
USE ONLY NON-COMBUSTIBLE MATERIALS BELOW
TOP OF SPACERS AND BEHIND FRONT FACE.
T
RIM
I
NSTALLATION
Wall ties should be fastened to the face of the fireplace with sheet metal screws and placed in the mortar joints
of masonry trim.
P
ART
C
OF
F
IGURE
31
SHOWS ACCEPTABLE COMBUSTIBLE MANTEL LOCATION IF FIREPLACE IS INSTALLED TO BURN WOOD
. S
EE
F IGURES 29 AND 30 FOR ACCEPTABLE COMBUSTIBLE MANTEL LOCATIONS IF AN UNVENTED GAS APPLIANCE IS INSTALLED IN THE
FIREPLACE
. P
ARTS
A
AND
B
OF
F
IGURE
31
ARE TYPICAL FOR EITHER WOOD OR UNVENTED GAS APPLIANCE INSTALLATION
.
F
IGURE
31
P
ART
A
P
ART
B
P
ART
C
53D9031. Rev 1 03/03
COMBUSTIBLE FRAMING
MEMBERS TO TOP OF SPACERS
COMBUSTIBLE SURROUND TRIM
COMBUSTIBLE MANTEL
TOP SPACER
**
*
TOP OF FIREPLACE OPENING
INSTALLATION OF COMBUSTIBLE TRIM MATERIALS
ABOVE THE TOP OF THE FIREPLACE OPENING
: 6" MINIMUM FROM TOP OF FIREPLACE OPENING TO BOTTOM OF
: 12" MINIMUM FROM TOP OF FIREPLACE OPENING TO BOTTOM OF **
*
COMBUSTIBLE TRIM MATERIAL WHICH PROJECTS NO MORE THAN
1-1/2" BEYOND THE FACE OF THE FIREPLACE.
COMBUSTIBLE TRIM MATERIAL WHICH PROJECTS MORE THAN 1-1/2"
BEYOND THE TOP OF THE FIREPLACE OPENING.
12" MAX.