MITSUBISHI ELECTRIC DV270 - Manual (Page 16)

DIGITAL SET TOP BOX
How to connect
Connect the Digital Set
Top Box to the LCD TV,
using the COMPONENT
INPUT and ensure an
aerial is connected to the
set top box.
1. Connect the three separate component video cables to the DTV
player’s Y, Pb, Pr or Y, Cb, Cr ports and to the Y, Pb and Pr ports on
the TV.
2. Connect the audio cables to the DTV player’s AUDIO L and R ports
and to the AUDIO L and R ports on the TV.
How to use
1. Select
COMPONENT
2. Turn on the DTV Set Top Box.
Warning: If you notice scrolling images, wrong colours or no colour, no
picture or even combinations of these on your screen, check if the
connections are inserted properly. Check if the cable colours match with
the Input connector colours.
PC
1
2
How to connect PC input
. Insert a D-sub signal cable into the D-sub port located on the back of the
LCD TV.
. Insert the Audio cable into the PC audio connector port on the back of
the LCD TV.
14