MITSUBISHI ELECTRIC DV270 - Manual (Page 8)

OPERATING INSTRUCTIONS
USING THE REMOTE CONTROL
br
MENU Press repeatedly
to display OSD menu.
DPF
Not Supported.
SWAP
Not Supported.
WIDE
Includes 3 modes: Press
repeatedly to select 4:3 /
16:9
/16:9 non-Linear.
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from 30, 60,
90,120 minutes. The timer
begins to count down from
the number of minutes
selected after the display has
disappeared.
POWER
Press to turn the TV
on/off. The TV is never
completely powered off
unless it is physically
unplugged.
0~9/100 Digit buttons
Press to select a TV
channel.
TV / VIDEO
Select your input source:
press repeatedly to select
TV, AV1, AV2, S-VIDEO or
COMPONENT mode,
according to where you
connected your external
source.
AV1 / AV2 for a VCR
connected to the AV
connectors of the TV.
S-VIDEO for a S-Video
VCR connected to the
S-VIDEO connector of
the TV.
COMPONENT for a
DVD/DTV Set Top Box or
another component video
device connected to Y,
Pb, Pr and to the AV
AUDIO inputs L and R.
VOL
Press + or – (or or )
to adjust the volume.
MUTE
Disable / enable sound.
CH
Press or (or ▲ or ▼) to
browse through the available
TV channels.
PRE-CH
To display the previously
selected TV channel.
SOUND
To select Mono
/Stereo/Sound A /Sound
B / Sound AB from TV
RF input
.
PC
Select input source from
PC.
DISPLAY
(1) Display Channel number
when using RF input.
(2) Display input source
when using other input
except TV RF input.
PIP
Toggle Picture in
Picture on/off
WIRELESS
Not supported.
6