Miele H 5061 B EN - Manual (Page 30)

Entering the Duration, a Start
time or Finish time
By entering the Duration, Start time or
Finish time, the cooking process can be
programmed to switch off, or on and
off, automatically.
– Duration
When entering the Duration, you are
entering the time that the food takes
to cook.
Once this time has elapsed, the oven
heating switches off automatically.
The maximum duration that can be
entered is 9 hours 59 minutes.
The Duration cannot be entered if the
food probe is being used as in this
case the length of the cooking
programme depends on the core
temperature being reached.
– Start time
By entering the Start time, you
specify the time you want cooking to
start. The oven will switch on
automatically at the time you have
set.
The Start time can only be used in
conjunction with Duration or Finish,
except when using the food probe.
– Finish
By entering the Finish time, you
specify the time you want cooking to
finish. The oven will switch off
automatically at the time you have
set.
A Finish time cannot be entered if the
food probe is being used as in this
case the end of the cooking
programme depends on the core
temperature being reached.
To enter the time
^ Select the required function and set
the temperature.
^ Touch the OK sensor.
^ Using the ; or ? sensors, scroll
through until the option required
(Duration, Start time or Finish) is
highlighted.
^ Touch the OK sensor.
Depending on the option selected, the
following will come up in the display:
– Duration: 0 : 00 h : min
– Start time: - - : - -
– Finish: - - : - -
The hour (to the left of the colon) is
highlighted.
^ Use the ; or ? sensors to first select
the hour, and confirm your selection
with the OK sensor.
After setting the hour, the minutes will
be highlighted.
^ Now use the ; or ? sensors to select
the hour, and confirm your selection
with the OK sensor.
If no cooking duration has been
entered, and you have simply
entered a Start time or Finish, then
–
touching the
; sensor adds an
hour to the time of day
– touching the
? sensor deducts
an hour from the time of day.
More about manual operation
30