Temperature format 45, Showroom programme 45, To switch the demo programme off 45 – Miele H 5061 B EN User Manual
Page 45: Factory default 45, Settings, Temperature format, Showroom programme, Factory default
Temperature format
– °C
(Factory default)
– °F
Showroom programme
This programme is for dealers who
want to demonstrate the appliance
without the heater elements working.
Do not activate this setting for domestic
use!
– Off
(Factory default)
– Demo programme
Follow the prompts in the display to
switch the demo programme on.
To switch the demo programme off
If you have switched on the demo
programme inadvertently, follow the
steps below to switch it off again:
^ Select "% Settings".
^ Select the "Showroom prog." option
and confirm your selection with OK.
^ Select the "Off" option and confirm
your selection with OK.
^ Touch the OK sensor for 4 seconds.
^ Confirm the closing prompt with OK.
Factory default
– All settings
Any settings that you have altered
will be reset to the factory default
setting.
– Recommended temperatures
Only those recommended
temperatures which have been
changed will be reset to the factory
default settings.
Settings
45