M-AUDIO DELTA 66 - Manual (Page 26)

“CCITT” or “50/15uSec” unless the transmitted audio has been encoded with one of
those types of pre-emphasis.
About Page
The “About” page, while displaying the handsome M Audio logo and applicable
copyright information, also reports the driver version and control panel software
version. If you have Internet browsing capabilities and are currently connected to
the Internet, clicking on the Midiman copyright will link you to the M Audio /
Midiman web site (PC only).
Save, Delete, Load Buttons; H/W Installed
On the PC, at the rightmost side of the Delta Control Panel are the Save, Load and
Delete buttons as well as an “installed hardware” set of radio buttons. These controls
appear regardless of what Delta Control Panel page is being displayed.
SAVE, DELETE, LOAD: The Delta Control Panel always retains the last settings
entered. However the Save, Delete, and Load functions expand this capability to
store different sets of control panel settings using different configuration file names.
These configurations are then available for recall at a later date and time.
Clicking the ‘Save’ button brings up a dialog box prompting you to name the current
configuration. Once you have done this, click ‘OK’, and your current configuration
has been saved to disk. If you decide that you no longer need a particular
configuration, click the ‘Delete’ button. Highlight the name of the configuration file
that you wish to delete, and click the ‘OK’ button. To recall or reload a saved
configuration, click the ‘Load’ button. Highlight the name of the configuration file
that you wish to recall, and click ‘OK’. Those settings will now appear in the Delta
Control Panel and the driver will automatically update the hardware.
H/W INSTALLED: Up to three Delta cards may be installed in a PC system at one
time (Note: On the Drivers CD, see the “Multi-card Installation” readme file). This
section displays all installed Delta cards, and allows you to select which particular
card is under the control of the control panel software. To select a card for
configuration, click the radio button to the left of that particular card in the
“H/W Installed” list.
ON THE MAC: To save your Delta control Panel settings, go to the File menu and
select “Save,”or “Save as.” A dialog box will appear, promting you to name the
current configuration. Once you have done so, click the Save button. To save the
current settings as your default, go to the File menu and choose “Save as
Preferences.”
In the upper righthand corner of the control panel is a “H/W Installed” drop-down
list. At the time of this writing, the Delta Mac ASIO drivers will support only a single
Delta device, and of course the Sound Manager will support only one stereo pair
25