M-AUDIO DELTA 66 - Manual (Page 45)

Appendix A - Technical Specs
Analog Audio
Peak Analog Input Signal:
+14dBu (+4dBu setting),
+6dBV (Consumer setting),
0dBV (-10dBV setting).
Peak Analog Output Signal: +14dBu (+4dBu setting),
+6dBV (Consumer setting).
0dBV (-10dBV setting)
Dynamic Range:
Outputs: 103dB (a-weighted),
Inputs: 99dB (a-weighted)
THD (at 0dBFS):
Outputs: less than 0.0015%,
Inputs: less than 0.0024%
Frequency Response: 22Hz - 22kHz, -0.3,-0.2dB
Input Impedance: 10k ohms minimum
Input Connectors: 1/4” female TRS-type, balanced or
unbalanced
Output Connectors:
1/4” female TRS-type, balanced or unbalanced
Digital Audio
Digital Input Format:
S/PDIF coaxial, 0.5V to 5V peak-to-peak.
Digital Input Sample Rate: 8kHz to 96kHz.
Digital Output Format: S/PDIF coaxial, 0.5V peak-to-peak;
AES/EBU data stream over S/PDIF coaxial.
Digital Output Sample Rate: 8kHz to 96kHz.
Adapter Resource Requirements
IRQ:
One required
I/O Addresses: Four blocks: 32, 16, 16, and 64 bytes
DMA Channels: None required
44