Motorola RDX SERIES RDU4100 - Manual (Page 93)

91
Scan Yes Yes N/A N/A SB2 Button Short press SB2 to enable/disable scan.
Scan List Yes No Yes Yes
ON - All
Channels
Use CPS for editing Scan List (adding/removing
channels to be scanned). For display models only:
you can add/delete channels in the scan list using
front panel by going into Programming Mode(1).
Scan, Auto
Scan
No Yes No Yes OFF
Feature available only for Non Display Models. For
front programming using front panel radio enter
Programming Mode(1)
Scramble (4) Yes No Yes Yes
OFF
(level 0)
Display models only: you can program scramble
using front panel by going into Programming
Mode(1).
Time-Out
Timer
No No Yes Yes 60 seconds
Use CPS to program to program how long the PTT
can be pressed before the transmission is
automatically terminated. Values are 60, 120 and
180 seconds. (Pressing again PTT will start the
transmission again).
Features
Programmable Via
RADIO PANEL
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display