Mark Levinson N 51 - Manual (Page 69)

3-33
Nº51 Media Player Setup Menu
General Parameters
General parameters control the screen saver and factory default
settings. To access general parameters, select General from the Setup
menu.
Screen Saver
(Setup : General : Screen Saver)
Activates and deactivates the screen saver.
• When enabled, the screen saver appears when a still frame
image has been displayed for more than selected amount of
time.
• When Off is selected, the screen saver never appears in the on-
screen display.
Still frame images displayed on a display device for long periods of
time can “burn in” or create “ghost images” on the screen. When
the media player is connected to a display device, it is recom-
mended that you set the Screen Saver parameter to On to prevent
the appearance of “ghost images” on the screen.
To enable/disable the screen saver:
Press the remote control up or down button to highlight the
desired setting, and press enter.
Rest. Fact. Defaults
(Setup : General : Rest. Fact.
Defaults)
When the Rest. Fact. Defaults parameter is set to Yes, all parameters
and user-defined controls are restored to their factory-default
settings.
To restore factory settings:
1. Press the remote control up or down button to highlight the
“Rest.Fact.Defaults” setting, and press enter.
2. When prompted to confirm the selection, press enter.
“Restoring Factory Defaults...” appears in the on-screen display
during the restoration process (approximately 20 seconds).
Parameter Default Possible Settings
Screen Saver After 5 min After 5 min
After 15 min
After 30 min
After 60 min
Off
Rest. Fact. Defaults Yes Yes, No
Setup
Audio
Video
Disc
General
Setup General
Screen Saver After 5 min.
Rest. Fact. Defaults