Mark Levinson N 51 - Manual (Page 97)

A-1
Appendix
Specifications
Audio Section
Audio Frequency
Response
10Hz to 20kHz, +0.1dB to -0.5dB
*THD + Noise 0.002% at 1kHz, 0dBFS (10Hz-30kHz), XLR
0.003% at 1kHz, 0dBFS (10Hz-30kHz), RCA
*Signal-to-Noise Ratio 102dB (10Hz-30kHz)
Digital to Analog
Converter Type
24-bit/192kHz PCM multibit
ΣΔ
Digital Audio Sample
Rates
44.1, 48, 88.2, and 96kHz (16 to 24 bits)
Channel Separation Better than 110dB
Intermodulation
Distortion (SMPTE IMD)
<0.005%
Maximum Output - XLR
(0dBFS signal)
4V (“Fixed” volume mode)
14V (“Variable” volume mode)
Maximum Output - RCA
(0dBFS signal)
2V (“Fixed” volume mode)
7V (“Variable” volume mode)
*Dynamic Range 102dB (10Hz-30kHz)
Digital Audio Output
Connectors
One AES/EBU on XLR
One S/PDIF coaxial on RCA
One EIAJ optical
One HDMI multi-pin
(All digital audio outputs conform to IEC-958 and S/PDIF standards.)
Analog Audio Output
Connectors
One balanced stereo pair on XLR
One single-ended stereo pair on RCA
Six single-ended multichannel on RCA
* Note: These measurements use a 10Hz-30kHz bandwidth filter.