Miele G 5100 - Manual (Page 13)

Checking the programmed water
hardness
^ Press the K button to turn the
dishwasher off.
^ Press and hold the "Start/Stop" button
and turn the dishwasher on
simultaneously using the
K button.
Keep the "Start/Stop" button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
^ Press the "Delay Start"" button twice.
The Delay Start indicator will flash twice
briefly in intervals.
Character will flash in sequence in the
display.
The number at the "
P" is the value for
the water hardness level which has
been set (see chart).
^ Press the K button to turn the
dishwasher off.
Before using for the first time
13