Viewing video images (continued), En-16, When projected images are distorted to a trapezoid – MITSUBISHI ELECTRIC HC900 User Manual
Page 16: Cinefocus button, Power button
EN-16
Viewing video images (continued)
To stop projecting:
8. Press the POWER button on the projector or the OFF (
) button on the remote control.
• A confirmation message is displayed.
• To cancel the procedure, leave the projector for a while or press the MENU button.
9. Press the POWER button on the projector or the OFF (
) button on the remote control again.
• The lamp goes out and the projector goes into a standby mode. In this standby mode, the POWER indicator
blinks red.
10.Wait about one minute for the POWER indicator to be lit in red steadily.
• During this period of one minute in the standby mode, the intake fan and exhaust fan rotate to cool the
lamp.
• Do not unplug the power cord while the POWER indicator is blinking. Unplugging the power cord immedi-
ately after use may cause a breakdown.
• Though the fan makes loud sounds during cooling, such symptom is not a malfunction.
11.Unplug the power cord from the outlet.
• Cover the lens with the lens cap to protect it from dust.
When projected images are distorted to a trapezoid:
With the control area of the projector:
1. Press the KEYSTONE button on the control area of the projector.
2. Equalize the widths at the top and bottom of the screen by pressing the
$ or % button, viewing the screen.
With the INSTALLATION menu:
(See Page 21 for menu setting.)
1. Display the INSTALLATION menu.
2. Select KEYSTONE by pressing the
{ or } button.
3. Equalize the widths at the top and bottom of the screen by pressing the
$ or % button, viewing the screen.
To cancel the menu:
4. Press the MENU button several times.
CineFocus button
Use to adjust the brightness and contrast of the image depending on the brightness level in the room.
1. Press the CineFocus button on the remote control.
2. Adjusts the brightness and contrast of the image by pressing the
{ or } button, viewing the screen. Every
time the
{ button is pressed, the image becomes brighter and more defined, suitable for TV viewing in a well-
lit room. Every time the
} button is pressed, the image becomes darker and the contrast is increased, suit-
able for watching movies in dim lighting.
POWER
STATUS
AUTO POSITION
OFF
ON
VOLUME
16:9/4:3
COMPUTER
GAMMA
VIDEO
COMPONENT
DVI-D(HDCP)
POWER
MENU
SELECT
DVD
VIDEO
MEMORY
CINE FOCUS
COLOR TEMP
ENTER
POWER button
OFF ( ) button
KEYSTONE
INSTALLATION
SVGA60
0
opt.