MITSUBISHI ELECTRIC HC900 - Manual (Page 36)

EN-36
Specifications
The specifications and outside appearance of the projector are subject to change without prior notice.
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum number of display colors
Maximum resolu-
tion
Computer signal
Video signal
Component
signal
Computer input
Video input
Speaker
Control terminal/Others
Operating temperatures
Rated voltage
Power consumption
Dimensions
Weight
Others
S-video input
Video input
Component
video input
Analog input
(DVI/BNC)
Digital input
(DVI)
Audio input
DLP™ projector
HC900
0.65-inch Single chip DMD (Aspect ratio 16:9)
Pixel 1024 x 576 = 589824 pixels
F 2.4 - 2.6 f= 23 - 27.6 mm
250 W
40" min. to 275" max. (Projection distance 1.3 to 10 m)
16770000 (full-color display)
Maximum resolution : 1280 x 1024 dots (Analog) / compressed
Panel resolution : 1024 x 576 dots
NTSC / PAL / NTSC 4.43 / PAL-M / PAL-N / PAL-60
480i, 480p, 576i, 576p, 720p, 1080i
Panel resolution : 1024 x 576 dots
[Signal type]
[Terminal type] [Line]
Analog RGB D-SUB 15P 1
Digital RGB DVI 1
[Signal type] [Terminal type] [Line]
Video input RCA 1
S-Video input S 1
Component video input RCA 1
2 W Mono Round type ø4.5cm x 1
RS-232C (8-pin) : For service person
+41˚F (+5˚C) to +95˚F (+35˚C)
AC100 - 240V, 50/60Hz
2.9A
310 mm (W) x 100 mm (V) x 245 mm (D) * Not included protrusion.
2.9 kg
Luminance signal : Vp-p=1.0 V 75
Ω (negative sync)
Chrominance signals : Vp-p=0.286 V 75
Ω (burst signal)
Vp-p=1.0 V 75 Ω (negative sync)
YC
B
C
R
: Vp-p=1.0 V 75 Ω (Y) (negative sync)
Vp-p=0.7 V 75 Ω (C
B
, C
R
)
RGB : Vp-p=0.7 V 75 Ω (negative sync)
YC
B
C
R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B
, C
R
)
HD/CS : TTL-level (negative or positive polarity)
VD : TTL-level (negative or positive polarity)
DVI interface (TMDS single link)
350 mVrms, 10 k
Ω or more
Replacement part
(Option / Not included in the box)
Spare lamp 499B041-20
(VLT-HC900LP)