Mellerware 35920 - Manual (Page 3)

Safety advice and cautions
• Read these instructions carefully before switch-
ing on the appliance and keep them for future
refer ence. Failure to follow and observe these
instructions could lead to an accident.
Use or working environment:
• Place the appliance on a horizontal, flat, and
stable surface.
•CAUTION: To prevent overheating do
not cover the appliance
Electrical safety:
• Do not use the appliance if the cable or plug is
damaged.
• Ensure that the voltage indicated on the rating
label matches the mains voltage before plugging
in the appliance.
• Connect the appliance to a mains socket with an
earth provision.
• The appliance’s plug must fit into the mains sock-
et properly. Do not alter the plug. Do not use plug
adaptors.
• Do not use or store the appliance outdoors.
• If any of the appliance’s casing breaks, immedi-
ately disconnect the appliance from the mains to
prevent the likelihood of an electric shock.
• Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage.
• Do not force the electrical connection wire. Never
use the electric wire to lift up, carry or unplug the
appliance.
• Do not wrap the power cord around the appli-
ance.
• Do not touch the plug with wet hands.
before each use.
Personal safety:
• Do not touch any of the appliance’s moving parts
while it is operating.
Use and care:
• Fully unroll the appliance’s power cable before
each use.
• Do not use the appliance if the on/off switch
does not work.
• Do not move the appliance while in use.
• Do not use the appliance if it is tipped up and
do not turn it over.
• Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
• This appliance is for household use only, not
professional or industrial use.
• This appliance is intended for adult use. Ensure
that this product is not used by the disabled, chil-
dren or people unused to its handling.
• This appliance should be stored out of reach of
children and/or disabled persons.
• Do not expose the appliance to extreme tem-
peratures.
• Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer’s liability null and void.
Installation
Assembly
• Fit the Adjustable Column (S) into the hole in
the Support Base (B), place the counterweight
(G) underneath the Support Base (B) and se-
cure with the “L” shaped screw (I) inserting the
washer (H) between the base and “L” shaped
screw (I) (Fig.1)
• Fix the motor body (A) to the adjustable
column (S) through the support motor (F) and
fix in place with the motor body screw fastening
(K) and the motor body fastening lever (L) mak-
ing it coincide with the appropriate holes. Next
introduce the incline adjustment screw (M) into
the appropriate hole and tighten it with the inline
adjustment lever (N)
MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 3 MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 3 7/7/2009 2:38:33 PM 7/7/2009 2:38:33 PM