Monte Carlo Fan Company 5WCR56XXD User Manual
Page 3
Loosen lock nuts and screws on yoke
till you can not feel screw on inside
of yoke.
Remove keeper from cross pin and
then cross pin from yoke. Replace
keeper on cross pin and save.
12
11
Lift mounting neck to mounting Plate and align
screws.
7
Secure mounting neck to the mounting plate
with four screws to become a complete mount-
ing bracket.
8
Loosen set screw that holds ball.
9
Slide ball down and remove pin save
pin for later.
10
Install top decorative cover over
downrod onto fan body. Then install
yoke cover.
Install canopy onto downrod.
18
17
Thread wiring through downrod.
Align hole in downrod with hole in
yoke and install cross pin. Install
downrod into yoke. Install keeper
into cross pin.
13
Tighten 2 downrod set screws and
lock nuts.
14
Install glass into cage and place on
fan body.
15
Install 6 x 15 watt incandescent can-
delabra bulbs.
16