Monte Carlo Fan Company 5WCR56XXD - Manual (Page 5)

Attach front cover to wall control
with screws provided.
41
Loosen 3 screw on light plate as
shown.
Plug white wire from fan to white
wire from light kit. Then plug black
wire from fan to black wire from light
kit.
32 33
Place light kit over screws and twist
direction of arrow into place. Then
tighten all 3 screws securely.
34
Install wall control unit to outlet box
using machine screws provided.
40
Install cage with glass onto light kit,
install rubber washer and hex nut to
hold in place and tighten in direction
of arrow.
36
Install 3 x 40 watt incandescent can-
delabra bulbs.
35
Install finial cap and tighten in direc-
tion of arrow.
37
Twist lower cover plate into place by
twisting in direction of arrow.
Replace 1 screw removed and tighten
all 3 screws securely.
31
To control fan speed select from High, Medium
or low speed buttons. To turn the fan off press
the Fan on / off button. To dim upper lights
press and hold U/L botton. To dim Lower lights
press and hold D/L button. To turn off either
up or down light press and quickly release
either U/L or D/L button. Press button marked
REV to reverse the rotation direction of the fan
blades
Fan speed
control but-
tons
Fan on / off
Light dim-
mer for up
and down
lights
Fan
reverse
button
42
Remove cover by snaping off from
top or bottom. Install 12V battery
into wall remote. Duracell MN21 /
Eveready A23 / GP 23A all 12V.
38
Attach cover of remote by placing
over buttons and snaping into place.
39