Memorex MVCB1000 - Manual (Page 20)

20
Changing the channels
You can change channels in several ways.
Method 1
Press CH+/CH- button on the remote control or the front panel
to change the channels.
Method 2
Using remote control buttons 0-9, and · (DOT) to select a
channel program.
e.g., channel 8:
Press 8 → OK
e.g., channel 15.1:
Press 1 → 5 → · →1 → OK
Method 3
1. Press BACK to switch to the previously tuned channel.
2. Press BACK again to switch back to the currently tuned
channel.
)
z
BACK will not work if no channel has been changed after
the converter box is turned on.
! The channel number and name are displaying on
the screen
2.10 WGBH-Dx
Tune to:
15.1_