Philips Magnavox 27MS3404R - Manual (Page 23)

23
A fter your personal access code has been set
(see previous page), you are now ready to
select the channels you want to block out or cen-
sor.
1 Press the NUMBERED (or CH+
or CH–) buttons to tune the chan-
nel you wish to block or censor.
2 Press the MENU button on the
remote to show the on-screen menu.
3 Press the CURSOR UP ▲ or
DOWN ▼ button until the word
FEATURES is highlighted.
4 Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
5 Press the CURSOR UP ▲ or
DOWN ▼ button until the words
SmartLock (AutoLock) are highlighted.
6 Press the CURSOR RIGHT ᮣ but-
ton. “ACCESS CODE” will appear
on the screen.
7 Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. The
SmartLock menu options will be dis-
played.
8 Press the CURSOR UP ▲ or
DOWN ▼ buttons until the words
BLOCK CHANNELS are highlight-
ed.
9 Press the CURSOR RIGHT ᮣ
button to turn blocking ON or OFF
for that channel. When ON is selected
the channel will be blocked.
Press the CH + or – buttons to
select other channels you wish to
block. Repeat step 9 to block the new
channel.
H OW TO B LOCK C HANNELS
Features
SmartLock
Format
Access Code
XXXX
Features
SmartLock
Format
Access Code
- - - -
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Main
Picture
Sound
Features
Install
SmartLock
Format
Features
SmartLock
Format
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Off Stop Time
Channel
Activate
Display
Channel 12
Blocked By SmartLock
Channel Blocking
Access Code
- - - -
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
On Stop Time
Channel
Activate
Display
VOL
1 2 3 POWER
CH
CH
VOL
VOL STATUS
EXIT
SLEEP MUTE
SMART
PICTURE SOUND
SURF
A/CH
4 5 6
7 8 9
0 CC
MENU
MAGNAVOX
10
4
6
9
2
3
5
8
1
7
If you tune to a blocked channel and enter
your Access Code to view the channel,
ALL blocked channels will be viewable until
the TV has been turned off. When the TV
is powered back ON, the previously
blocked channels will be blocked again.
H ELPFUL H INT
10
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
NOTE: The 0,7,1,1 access code shown on
this page is the default code or a way to
reset the code when the current access
code is not known.
Some models refer to SmartLock as
AutoLock, your TV may show AutoLock
instead of SmartLock in the on-screen
menu. These features are the same.