Metz 30 LCD-TV PIP - Manual (Page 15)

15
Open the menu 6. Tuning to TV stations
You can tune your TV set to TV stations in three
different ways:
a) Automatic Programme Search (APS)
The automatic programme search searches the
entire range of channels for TV stations. All sta-
tions which are found are placed in a station table
which is displayed at the end of the search. If you
do not like the order in which the stations appear
in this table, you can move stations to other posi-
tions and/or delete unwanted stations. For further
details, see Section 9, "Sorting the stations".
Executing an automatic programme search
• Press the "MENU" key to open the TV menu.
• Use the cursor key
̈ to select the menu
"Settings".
• Use the cursor key ̄ to select the menu item
"TV tuner".
• Press the "OK" key and open the sub-menu
"Programming".
• Use the cursor key ̈ to open the
sub-menu "APS".
• Use the cursor key ̄ to select the
menu item "Auto setting".
• Press the "OK" key. You are then
asked if you really want to start the
programme search.
• Press the "OK" key again to start
the search..
• A station table containing the
results of the search is displayed.
• You can delete any unwanted sta-
tions from the table by selecting them with the
cursor key and pressing the red key.
The settings are saved automatically when
you close the TV menu.
☞
MENU
OK
aps
<ok> to start aps function
autoset <ok> to enable