Li-ion battery installation, Li-ion battery installation -4 – Motorola MC1000 User Manual
Page 16
1 - 4
MC1000 with Windows CE 4.2 User Guide
Li-ion Battery Installation
To install the Li-ion battery:
1.
Pull back the two battery door latches.
2.
Lift the battery door.
Figure 1-2
Battery Door Removal
3.
With your index and middle fingers holding the sides of the battery adapter clip, push toward the top of the
mobile computer until it is latched in the up position.
4.
Insert the battery into the battery well top first.
Figure 1-3
Li-ion Battery Insertion
5.
Replace the battery door bottom first and press down until it snaps into place.
CAUTION
Ensure the battery adapter clip is positioned correctly or damage to the battery adapter clip and
battery door may occur.
Avoid touching the contacts when positioning the battery adapter clip.
Battery Adapter Clip
Battery Door Switch
NOTE
The battery door switch detects if the battery door is installed properly. The mobile computer does not turn
on if the battery door is not in place.