Mark Levinson 512 - Manual (Page 15)

Mark Levinson N o 512 CD/SACD Player Serial Communications Protocol
7.11 PWR
Command Parameter Function Incoming Request Outgoing Response Comment
PWR ON Player Powered ON from Standby PWR:ON\r PWR:ACK\r
Also removes the player from the
Standby mode.
STANDBY Place Player into Standby Mode PWR:STANDBY\r PWR:ACK\r
? Request Current PWR State PWR:?\r PWR:ON\r
System Powered ON.
The command responds if the player
is in Standby mode. However, the
command does NOT change the
Standby mode state.
PWR:?\r PWR:STANDBY\r System in Standby
EN Enables Notification PWR:EN\r PWR:ACK\r
DIS Disables Notification PWR:DIS\r PWR:ACK\r
NTF? Query Notification State PWR:NTF?\r PWR:EN\r Notification is Enabled
PWR:NTF?\r PWR:DIS\r Notification is Disabled
7.12 REPEAT
Command Parameter Function Incoming Request Outgoing Response Comment
REPEAT OFF Set Repeat option to OFF REPEAT:OFF\r REPEAT:ACK\r
TRACK Repeat current Track REPEAT:TRACK\r REPEAT:ACK\r
DISC Repeat current disc or program REPEAT:DISC\r REPEAT:ACK\r
? Request Current Control State REPEAT:?\r REPEAT:OFF\r
REPEAT:?\r REPEAT:TRACK\r
REPEAT:?\r REPEAT:DISC\r
REPEAT:NACK\r
The player is in Standby Mode so
commands are ignored.
15