Metz MF 55TK36 - Manual (Page 14)

- 12 -
Setting Sharpness
• Using “P+“ or “P-” button select Sharpness.
• Press “ ” button to increase peaking level.
• Press “ ” button to decrease peaking level.
Mode
This item is used to change the picture size.
By pressing “ ” or “ ” button you may
choose one off three options. These are,
“4:3”, “16:9” and “AUTO”.
• 4:3 This option forces the picture ratio to 4:3
mode.
• 16:9 This option forces the picture ratio to
16:9 mode.
• AUTO :This allows to change the picture
mode automatically, according to the trans-
mission of the selected channel. For ex-
ample, your TV is 4:3 mode, but the trans-
mission of that channel is in 16:9 mode. If
you select the AUTO mode, the TV is
switched to 16:9 mode automatically. If the
TV is in 4:3 mode and the picture ratio of the
channel is also 4:3, there will be no affect
selecting the picture mode to AUTO mode.
In RGB and S-VHS modes the Picture Mode
can be 4:3 or 16:9 (Auto mode is not avail-
able.).
To Store the Settings
• Press “ ” or “ ” button on STORE option to
store Picture menu settings.
The stored picture mode setting will be valid
only in current program. However, the other
stored values in Picture Menu will be valid
for all the programmes.
Feature Menu
• To enter the Feature menu directly, press the
“YELLOW” ( ) button, or
• Press "MENU"button, now you are in Main
menu. In the Main menu, select FEATURE
using “P+“ or “P-” button. Then enter the
Feature menu pressing “ ” or “ ” button.
Sleep Timer
As you enter the Feature menu, SLEEP
TIMER will be the first selected option. Use
“ ” or “ ” button to change the Sleep Timer
values between OFF, 0:15:00, 0:30:00,
0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00
and 2:00:00.