Appendix b, Mm-4 specifications – Meyer Sound MM-4CEU User Manual

Page 20

Advertising
background image

14

APPENDIX B

APPENDIx b

mm-4 Specifications

Acoustical (mm-4CEU required)
Note:
To realize the MM-4’s full capabilities, an MM-4CEU must be used. The amplifier driving the loudspeakers should be capable of 49 volts

RMS at the rated load impedance, and provide a voltage gain between 10 and 30 dB (20 dB for optimal S/N ratio and protection). The power

rating of the amplifier should be as follows: 1 MM-4/ch (16

Ω): 150 W; 2 MM-4/ch (8 Ω): 300 W; 4 MM-4/ch (4 Ω): 600 W; 8 MM-4/ch

(2

Ω): 1200 W

Operating frequency range

120 Hz - 18 kHz

Note: Recommended maximum operating frequency range. Response depends on loading conditions and

room acoustics.

Frequency response

160 Hz - 16 kHz ±4 dB

Note: Free field, measured with one-third octave frequency resolution at 4 meters.

Phase response

700 Hz - 17 kHz ±45°

Maximum peak SPL

112.5 dB

Note: Measured with pink noise at 1 meter.

Maximum continouos SPL

100 dB

Note: Measured at 1 meter, driven continuously for two hours with pink noise signal having a 12.5 dB peak-

average ratio.

Horizontal coverage

80° (3 kHz - 14 kHz ±10°); 120° (below 2 kHz)

Vertical coverage

80° (3 kHz - 14 kHz ±10°); 120° (below 2 kHz)

Transducer

One 4" cone driver; Nominal impedance: 16

Ω; Voice coil size: 0.75"; Power-handling capability: 100 W (AES)

Note: Power handling is measured under AES standard conditions: transducer driven continuously for two

hours with band-limited noise signal having a 6 dB peak-average ratio. Aluminum enclosure dissipates heat

generated by driver.

Physical

Dimensions

4.00" H x 4.00" W x 4.20" D excluding connector (102 mm x 102 mm x 107 mm)

Weight

3 lbs 14 oz (1.76 kg)

Enclosure

Extruded aluminum

Finish

Black anodized; custom color available

Protective grille

Perforated metal screen

4.40"

(112 mm)

4.00"

(102 mm)

4.00"

(102 mm)

4.20"

(107 mm)

2.93"

(75 mm)

2.00" (51 mm)

Weather-protected version: EN3 Connector

Indoor version: Phoenix-Style Connector

mm-4 Rear Panels

4.40"

(112 mm)

4.00"

(102 mm)

4.00"

(102 mm)

4.20"

(107 mm)

2.93"

(75 mm)

2.00" (51 mm)

Advertising